Cable seal Rfid antitamper


antitamper rfid cable seal

CABLE SEAL RFID ANTITAMPER combines the mechanical security of traditional LEGHORN CABLE SEAL product together with the electronic security offered by the latest radio frequency-based automatic identification (RFID) techniques.

The plastic enclosure of the seal, in robust ABS material, embeds an electronic chiptag  with unique code that not only enables the automatic identification of any container or transport vehicle, which the seal is attached onto, but enables also immediate, easy and reliable readings of the integrity status of the seal, by giving information about any tamper evidence.

RFID ANTITAMPER SEAL is the step ahead in front of already existing RFID SEAL


  • Is a High Security Seal;
  • Univocally identifies the container or the vehicle to which it is attached;
  • Can be easily and reliably read by fixed reading units placed at transit gates or by handheld reading units manually operated by inspectors and gives back it unique code as a basic RFID seal;
  • When compared to standard RFID seals, tamper evident RFID seals are able to permanently store into their memory the tamper event by activating a status bit named TAG TAMPER ALARM, thus providing immediate information about seal status at readings (tampered/not tampered);
  • Can store additional information but the ID code, also in password-protected mode, by using same devices that are used for the reading operation;
Radio Frequency specification
Frequency: 860 – 960 MHz – UHF EPC Global
Reference RF Standard: ISO/IEC 18000-6C
RF Protocol: EPC Class 1 Gen2 / ISO/IEC 18000-6C
Technology: Passive
Integrated circuit NXP
Mechanical specification
Material Aluminum + ABS  or polystyrene in accordance with Restriction of Hazardous Substances (RoHS) listed in the European Directive 2002/EC.
IP Protection IP66
Operative Temperature – 30°C / + 80 °C
Storage Temperature – 30°C / + 80 °C
Size Electronic Part (flag) mm 42 x 115 x 4 (1” 21/32 ” x 4” 17/32 ” x 5/32 ”)
Wire standard lenght mm 200 (7” 7/8 ”)
Wire diameter mm 3,5 (9/64”)
Weight 61 g
ISO 17712:2013 yes
Package size cm
Package weight  6,1 kg (13lb)
Package number seal for box 100 pcs
Electronic specification
Reading distance handheld reader 3 m (dependig on reader) (9′)
Reading distance gate reader 8 m (dependig on reader) (26′)
Quality: 100% performance tested
User Memory: Yes
Read / write cycles: 10000
Memory size: from 128 bit up to 448 bit of EPC Memory;up to 640 bit of User Memory
Password protection: yes
Tamper Detection: yes
TID (tag unique identification): yes
S/N in memory (same of seal): yes
Data retention: 20 years
Integration with handheld reader: commercial PDA, OS ANDROID
Integration with gate reader commercial industrial reader



Antitamper Rfid cable seal



[cml_media_alt id='5815']cableseal antitamper colorato[/cml_media_alt]





[cml_media_alt id='3471']cableseal-rfid-1[/cml_media_alt]
A) Insert the tamper evidence cable tip into the eyelet of the container handle.

[cml_media_alt id='3472']cableseal-rfid-2[/cml_media_alt]
B) Insert the tamper evidence cable tip into the hole on the upper part of the seal plastic body. “]

[cml_media_alt id='3473']cableseal-rfid-3[/cml_media_alt]
C) Pull down to the desired length. Once the tamper evidence cable has been inserted into the plastic part, inner mechanical lock will block it in a irreversible way.

[cml_media_alt id='3476']cableseal-rfid-4[/cml_media_alt]
D) Use the RFID reader to check that the seal is active and that it has been properly closed. GREEN indication on the display confirms that the reading is taking place correctly and that the seal is not breached.”]

[cml_media_alt id='3474']cableseal-rfid-5[/cml_media_alt]
E) At container on destination and once the seal integrity has been checked again, it can be removed by shears. “]

[cml_media_alt id='3475']cableseal-rfid-6[/cml_media_alt]
F) Use the RFID reader to check that the seal cable has been cut. RED indication on the display confirms that the seal has been breached.