wire security plastic seal rfid anchorflag

UHF/HF/NFC RFID Meter Seal ANCHORFLAG

Wire seal embedding UHF, HF or NFC tag for automatic identification function

Specifications and design are subject to change without any notice or obligation from the manufacturer.

Description
How to use

Description

Completely transparent plastic seal. The transparent plastic permits the integrity control of the locking mechanism.

UHF
– RF protocol: EPC Class 1 Gen2 – ISO/IEC 18000-6C
– Integrated Circuit(IC): IMPINJ Monza 3 ; Read/Write
– Memory: EEPROM
– Operating Frequency: 860 – 960 MHz – UHF Global
– Protection: IP66
– Operating temp: -20°C to +80°C
– Storage temp: -20°C to +80°C
– Tag dimension: 12 x 30 mm
– Resistance harsh factory environment
– Reading distance: Typical reading with handheld reader: 5 – 15 cm

TECHNICAL DRAWING

MATERIAL
Polycarbonate
Polystirene

COLORS & CUSTOMIZATIONS

MARKING OPTIONS
– LASER PRINT
– Sequenced numbering up to 15 digits
– Customised up to 20 characters on one line
– Logos available upon request
– For special orders, logo printing in relief

PACKAGING
4.000 seals per carton
carton size: 56 x 24 x 46 cm (22” 3/64” x 9” 29/64” x 18” 7/64”)
carton weigth: 12 kg (26 lb)

How to use

A) Insert the wire in the holes on the seals body.
B) Push the “anchor” part in the hole.
C) Press with the fingers till the seal is really closed. If it clicks by closing the safe closure is guaranteed.