NEPTUNE UHF RFID LOGISTIC SEAL

Description

LeghornGroup NEPTUNE UHF RFID LOGISTIC bolt lock High Security Seal is a sturdy  container bolt seal that combines high mechanical security as required  by the ISO17712:2013 technical standard with the electronic security offered by RFID, automatic radio frequency identification technology.

NEPTUNE UHF RFID LOGISTIC SEAL has read-only univocal ID; additional user memory is available for the storage of customer-specific information.

The outer ABS plastic housing of the seal – customizable  with mark and numbering on request – embeds an unique electronic RFID chip that has its own univocal coding, which cannot be replicated.  This allows for secure and reliable automatic identification of the seal  applied to the container.

RFID provides automatic  identification of the  container: NEPTUNE UHF RFID LOGISTIC SEAL can be automatically  detected when  trucks/containers are on-the-go at gateways, by using RFID gates. It can be read quickly and  accurately by static  gateway reading systems, which makes gate in/gate  out operations faster and more reliable and  secure (human error  free).

If needed it also can be read/written by handheld devices operated by check point  personnel.

The RFID chip can also  be used to store further information added and the chip itself, which  can be even password  protected.

The chip can  be easily written by using any commercial  RFID reader/writer device compliant with international standard ISO18000-6C.

This seal is available also in tamper evidence version: the status of the  seal (TAMPERED / NOT TAMPERED) is immediately detected and read at  time of passing through gate or by  manual inspection.

 

TECHNICAL DRAWING

SIZE
Metallic pin
Diameter: 8 mm (5/16”)
Length: 74 mm (2” 29/32”)

Bolt size
Diameter: 22 mm (55/64”)

Electronic Part (flag): 42×115×4 mm (1” 21/32”×4” 17/32”×5/32”)
Weight: 70 gr (0.15 lb)

 

Radio Frequency specification
Frequency: 860 – 960 MHz – UHF EPC Global
Reference RF Standard: ISO/IEC 18000-6
RF Protocol: EPC Class 1 Gen2 / ISO/IEC 18000-63
Technology: Passive
Integrated circuit: NXP G2iM+
User read / write memory: yes – up to 640 bit
Memory size: from 128 bit up to 448 bit of EPC Memory
TID (Tag IDentifier): 96 bit, including 48-bit factory locked
Unique serial number: 112 bit User TID memory
Password protection: yes
Tamper Detection: no
Read / write cycle: 10000
Data retention: 20 year

 

Performance
Reading distance by handheld reader: 3 m (118” 7⁄64”) (depending on reader)
Reading distance at gate reader: 8 m (314” 61⁄64”) (depending on reader)
Quality: 100% performance tested

 

Mechanical specification
IP Protection: IP66
Operative Temperature: 20°C/ +55°C
Storage Temperature: – 30°C / +80°C
ISO 17712:2013: yes
Size Electronic Part (flag): mm 42 x 115 x 4 (1” 21⁄32” x 4” 17⁄32” x 5⁄32”)
Metallic pin diameter: 8 mm (5⁄16”)
Metallic pin length: 73.5 mm (2” 29⁄32”)
Bolt diameter: 20 mm (55⁄64”)
Weight: 70 g
Material: carbonitrured steel + ABS in accordance with Restriction of Hazardous Substances (RoHS), European Directive 2002/EC

Needed certificates with the use of high security seals compliant with iso 17712: 2013

ISO 17712: 2023

Certificate SGS